Skip to main content

Re-programming Ubislate 7C+



Re-Programming / Flashing Ubislate 7c+

This procedure of flashing / re-programming will help you to solve many problems as below...

  • Tablet Stuck at home screen, Freezed
  • Any Software related bug, developed later on which can't be solved with Factory reset.

Since this is the procedure from Datawind itself, so you don't need to worry before doing any step.

You need 1 tool & 1 image file before starting the process.
  • Phoenix Card SW
  • Any Micro SD Memory Card
  • Image file - SW for Ubislate, 281 Mb 
Steps:-

1)    Kindly download the Phoenix card software from here.

       https://mega.co.nz/#!coc0HTQJ!WpZmCGRdGwXnzCOaUInqpBzMfDtFjCwEqVWfPg16N20
2)    Extract PhoenixCard.rar by using Winzip or Winrar.
3)    Then download the image file which is SW for your tablet from below link (281 Mb)
https://mega.co.nz/#!Iwt1SLhL!eSTrg0vtswcZBUszaeSSmyHjt6QlD2U1LJE0MDV5qOc
4)    And extract it into same folder where the PhoenixCard is extracted.
5)    Take a micro SD card and format it.
6)    Insert the SD Card into laptop or PC by using memory card reader.
7)    Double click on PhoenixCard app into the folder of PhoenixCard.
8)    A window will open and in the disk Box, select the Drive of your SD Card.
9)    Now click on img File and select the “wifi 8188CUS sun5i_android_a13-baili.img” file.
10) Then click on Burn button. And it will show you some processing.
11) After completion this processing exit phoenixCard app and remove the SD Card from laptop/PC.
12) Switch off your device and insert that SD Card into the device and turn it on.
13) It will shows a progress bar on the centre of the display after completion of this bar click ok and remove SD Card.
14) Again start the device as normal.

That is all....

Comments

Anonymous said…
LETS DEVELOP UBISLATE 7C+ AND SHARE KNOWN GOOD/BADS OF DEVICE
« on: Today at 04:35:22 PM »
QuoteModifyRemove
PLEASE PLEASE PLEASE HELP
HEY PLEASE VISIT THE LINK https://mega.co.nz/#!uFUHUCaJ!cl4stDGdqH3011FnNqEnkGjNpEQD1eRkntouUWELb6E
AND LIKE IT AND SHARE IT AS I REALLY TRUELY WANT TO HELP ALL THE UB ISLATE 7C+ USERE AS THE FUCKING DATAWIND IS NOT HELPING IN PROVIDING ROMS AND ALL.

I ASSURRE U ALL THAT WE TOGETHER WILL SOLVE ALL PROBLEMS.
I ALREADY HAVE MANY SOLUTION OF MANY KNOWN PROBLEMS FACED BY USERS WHO HAVE POSTED ON WEB.SO PLEASE LIKE AND VISIT THE LINK https://mega.co.nz/#!uFUHUCaJ!cl4stDGdqH3011FnNqEnkGjNpEQD1eRkntouUWELb6E
Anonymous said…
LETS DEVELOP UBISLATE 7C+ AND SHARE KNOWN GOOD/BADS OF DEVICE
« on: Today at 04:35:22 PM »
QuoteModifyRemove
PLEASE PLEASE PLEASE HELP
HEY PLEASE VISIT THE LINK https://mega.co.nz/#!uFUHUCaJ!cl4stDGdqH3011FnNqEnkGjNpEQD1eRkntouUWELb6E
AND LIKE IT AND SHARE IT AS I REALLY TRUELY WANT TO HELP ALL THE UB ISLATE 7C+ USERE AS THE FUCKING DATAWIND IS NOT HELPING IN PROVIDING ROMS AND ALL.

I ASSURRE U ALL THAT WE TOGETHER WILL SOLVE ALL PROBLEMS.
I ALREADY HAVE MANY SOLUTION OF MANY KNOWN PROBLEMS FACED BY USERS WHO HAVE POSTED ON WEB.SO PLEASE LIKE AND VISIT THE LINK https://mega.co.nz/#!uFUHUCaJ!cl4stDGdqH3011FnNqEnkGjNpEQD1eRkntouUWELb6E
Gaurav R. Zawar said…
can we use pendrive instead of SD card??
Unknown said…
PLEASE GIVE ANOTHER link for image file. as it is sucking from downloading above website.
ayans said…
Hi
Can I use that image file for UbiSlate 7Ci also?
Abdul Razak C M said…
No. It can use only to 7c+
Unknown said…
my ubislate 7c+ is giving error
sprite update error:fail to scan flash information
sprite update error:current card sprite failed
now hold the machine

Plz help me ………………….
Abdul Razak C M said…
Are you reprogramming the tablet?
Unknown said…
I have stuck on cwm ...
Abdul Razak C M said…
Please let me know the exact problem you are facing.
Unknown said…
i did all ..but it showing error
sprite update error:fail to scan flash information
sprite update error:current card sprite failed
now hold the machine
Abdul Razak C M said…
You need to use LiveSuite application installed on your PC and flashing tablet via miniUSB cable.
Search for a file with *.img extension in your archive with firmware. Then download LiveSuit application with driver from this link: http://www.mediafire.com/?17c2t5mcbh4suda
1. Unpack archive and install Livesuit
2. Turnoff tablet by pressing power button for a 20 seconds
3. Start Livesuit (click No in first window) and select your firmware (*.img file by pressing box button in LS) then press button (with mechanism icon)
4. Press and hold vol- button (or home button) on tablet and connect miniUSB cable at the same time
5. Still holding vol- button then press power on button 6 times and unrelease vol-
6. Tablet will be recognized by Windows and the new device dialogue appears (select manual driver installation and go to folder with LiveSuit where drivers is placed)
7. Flashing will start automatically after drivers installation
8. Wait for ending then unplug cable.
Unknown said…
wifi not turning on please help
Abdul Razak C M said…
Hi,

Please try to install any wifi finder or booster application from Android store.
If it is a hardware problem, cannot do anything. Contact Datawind customer care to replace the device/ or for service center.
Unknown said…
Dear Razak, i have done as u said. But wifi is not working pl give me some assistance..
Maz said…
A salam Razzaq my UBISLATE 7cz is stuck on boot logo, it is just showing data wind logo. It is in warranty period, can you help me?
Dear sir/mam,
I did it as u said at starting with img file, thats working thank's
for that,. but actly touch not working????/ what to do for that
Unknown said…
my touch is not working after flashing my tablet using sd card
Unknown said…
Chirag Shah Here..Hello Rajak...As You said...I burn img file in Micro SD card and inserted in switched off tablet..but now I am trying to power on...but it is not giving me and display..please reply me
Unknown said…
TOUCH NOT WORKING
Unknown said…
After Reprogramming It. TOUCH IS NOT WORKING.....HELP ME......
junaid quresh said…
This comment has been removed by the author.
junaid quresh said…
how i can livesuit application use for tablet
i do for all this but succes plss help
junaid quresh said…
your all problem is sloved in this video
https://www.youtube.com/watch?v=FPltXd0hfN4
junaid quresh said…
your all problem is sloved in this video
https://www.youtube.com/watch?v=FPltXd0hfN4

Popular posts from this blog

How to access metadata in MySql from Java application (User does not have access to metadata ,SQLException)

When you get an error message like: java.lang.Exception: java.sql.SQLException: User does not have access to metadata required to determine stored procedure parameter types. If rights can not be granted, configure connection with "noAccessToProcedureBodies=true" to have driver generate parameters that represent INOUT strings irregardless of actual parameter types. Ans: Please use the below connection string settings:  private Connection con;  String connectionURL = "jdbc:mysql://<ip address>:3306/<database name>?user=<username>&password=<password>&noAccessToProcedureBodies=true"; con = DriverManager.getConnection(connectionURL);

How to Connect mysql through JDBC connector through Tomcat or externally.

Solution: This can happen for a variety of reasons. I just saw it myself a few weeks ago but I can't remember what the fix was for me. 1) Verify the address mysql is bound to, it's probably 127.0.0.1 (only) which I believe is the default (at least on standard Ubuntu server). You'll have to comment out the bind-address parameter in my.cnf to bind to all available addresses (you can't choose multiple, it's one or all). 2) If it is bound to 127.0.0.1 and you can't connect using "localhost", make sure it's not resolving to the IPv6 localhost address instead of IPv4. (or just use the IP address) 3) Double and triple-check the port that mysql is listening on. 4) Make sure you're using the right JDBC connector for your JDK. 5) Make sure you're not doing something really silly like starting mysql with --skip-networking.

Connecting to MySql Server Remotely

When you get an error message like this: javax.security.sasl.AuthenticationException:  Database Error: java.sql.SQLException: null,  message from server: "Host 'xx.xx.xx.xx' is not allowed to connect to this MySQL server" It show that you are not configured the MySql Server correctly. To configure a MySql Server for accessing remotely you need to grant permission for the client in the Server. Here is the Linux command line codes: root@server:~#  mysql -u<username> -p<password>       - log in to MySql > grant all on cheque_alert.* to '<user>'@'<IP address of remote system>'; This will grant all permission to the client machine from the IP:xxx.xxx.xx.xxx To view the permission for any client: > SHOW GRANTS FOR '<user>'@'xxx.xxx.xx.xxx';   eg.: SHOW GRANTS FOR 'root'@'11.111.105.111'; To remove the Grant/permission :  > DROP USER '<user>'@'xxx.xxx.xx